Ok, some time ago i gave a fair warning and time's up, as i always keep my word.
PLEASE DON'T SHARE MY LINKS IN OTHER FORUMS WITHOUT ASKING FIRST.

What you see is what you get - don't ask for support because this and that, just read and use it if you need them.

1. Make sure your interface has genuine vid and pid(6001) if not use the restore of ocfd.
if your system has modified ftdi drivers first use the cleaner included then install the proper drivers.
2. Make sure your interface uses ftdi driver that is maximum 2.10.0.0 AND NOT NEWER!!!!! -> this is a must.
3. Make sure your interface has a proper firmware, not some fake 1.70 or 1.99 or some other shit chinese inventions.
To be sure use included ocflash to put one of the firmwares there. Maximum official version is 1.67 on last 2020.06 version.

--------------------I AM NOT RESPONSABLE FOR BROKEN INTERFACES THAT DO NOT HAVE GENUINE PIC18F458-I/PT--------------------

Any interface without this chip is just a copy junk that sooner or later will brake. Buy a 20$ chinese clone and be happy.
Buy a proper one(Genuine V5 model), do the modification to revision C and then you get also manual scan to CH-CAN modules.
--------------------------------------------------------------------------------------------------------------------------

  All that you get here is FREE, make sure you read the txt on install screens. All versions are in ENGLISH.
  You can install all of them in the same computer because they will make own folders in the same subfolder and will
  create shortcuts in the same program GROUP.
  
I REPET -> MAKE SURE YOUR INTERFACE HAS FTDI DRIVERS 2.10.0.0 OR OLDER AND THAT YOUR VID AND PID ARE VID_0403 PID_6001
ALL MY KITS USE GENUINE FTDI DRIVERS 2.08.30 SO IF INTERFACE IS CONNECTED ON INSTALL IT WILL UPGRADE YOUR DRIVER.

Password if needed is fantomel
Enjoy :)

If a download link asks for $ , go to the next one, it's FREE.
If you have a genuine interface (not clone) PM me with Type of interface and a few pics and i will help you out FOR FREE.